Car power amplifier 2x100W
VX-2.100
Two-channel amplifier delivering 200 watts at peak loads, ready to work both channel and bridged. Has low harmonic distortion, Low pass and High pass filters. With it you will qualitatively improve the sound of your system and unleash the potential of your components.
The ACV VX-2.100 two-channel amplifier will be a useful component that will make your in-car audio reproduction better, cleaner and more detailed. With a channel-by-channel connection of 4 ohms, it outputs 100 W, in a bridged connection - 300 W.
The amplifier is equipped with everything that is required for effective work. First, these are low-pass and high-pass filters with a cutoff frequency of 32-250 Hz and a channel separation of 45 dB. Secondly, the stepped Bass Boost, which is very convenient if the device will be used in a wide-range speaker system, it raises low frequencies by 6/12 dB. Third, low distortion, as well as low signal-to-noise ratio. It has an extended frequency range of 10Hz ~ 30kHz, and has overvoltage / undervoltage protection:> 18 / <9.
With this amplifier you will be able to improve the sound of any register, be it the upper range, midrange or bass.
Specifications
Features
Stable work at loads: 2 and 4 ohms, stereoBass Boost: 0-6-12dB
Fuse rating: 30A
Frequency range: 10Hz ~ 30 kHz
Low level signal output: no
Parameters
Rated power at 4 Ohm: 100W x 2, bridged (MONO): 300W x 1Rated Power at 2 Ohm: 150W x 2
Peak power at 4 Ohm: 150W x 2
Peak power total: 700W
Sensitivity: 200mV-8V
Signal to noise ratio: ≥96dB
Harmonic Distortion: (THD) @ 1kHz (4Ω): 0.15%
Channel separation
Channel separation: >45dBLow pass filter: 30-300Hz
High pass filter: 30-8 kHz
Number of channels: 2/1