Car power amplifier 2x100W
LX-2.100
Two-channel amplifier delivering 200 watts at peak loads, ready to work both channel and bridged. Has low harmonic distortion, Low pass and High pass filters, external Bass Boost. With it you will qualitatively improve the sound of your system and unleash the potential of your components.
The ACV LX-2.100 two-channel amplifier will be a useful component that will make your in-car audio reproduction better, cleaner and more detailed. With a channel-by-channel connection of 4 ohms, it outputs 100 W, in a bridged connection - 300 W.
The amplifier is equipped with everything that is required for effective work. First, these are low-pass and high-pass filters with a cutoff frequency of 32-250 Hz and a channel separation of 45 dB. Secondly, the stepped Bass Boost, which is very convenient if the device will be used in a wide-range speaker system, it raises low frequencies by 6/12 dB. Third, low distortion, as well as low signal-to-noise ratio. It has an extended frequency range of 10Hz ~ 30kHz, and has overvoltage / undervoltage protection:> 18 / <9.
With this amplifier you will be able to improve the sound of any register, be it the upper range, midrange or bass.
Features
Stable work at loads: 2 and 4 ohms, stereo
Bass Boost: 0-6-12dB
Fuse rating: 30A
Frequency range: 10Hz ~ 30kHz
Low level signal output: Yes
Parameters
Rated power at 4 Ohm: 100W x 2, bridged (MONO): 300W x 1
Rated Power at 2 Ohm: 150W x 2
Maximum power 2 Ohm: 700W
Sensitivity: 200mV-8V
Signal to noise ratio: ≥96dB
Harmonic Distortion: (THD) @ 1kHz (4Ω): 0.15%
Channel separation
Channel separation: >45dB
Low pass filter: 30-300Hz
High pass filter: 30-8 kHz
Number of channels: 2/1
General details
Dimensions: 200 x 58 x 232mm