Car power amplifier 4x80W
LX-4.80
Automotive four-channel AV class amplifier. which has the sound quality to a whole different level. It features High / Low pass filters, stepped BassBoost and dramatically improves speaker performance. Fixed channel separation of 45 dB.
Devices of this type are the most demanded and widespread on the market today due to their excellent characteristics and affordable cost. The efficiency of class AB amplifiers is 50%, they perfectly perform their functions and at the same time do not heat up, as, for example, analogs from class A.
The LX-4.80 amplifier is also relevant due to its versatility. It has four connection options: with two or one subwoofer, four or two speakers, and also paired with speakers and a subwoofer. The device is designed to operate with a resistance of 2-4 ohms, has two 20 A fuses and has a long service life even with active use at high loads. Whichever connection option is used, the device shows itself perfectly from all aspects.
This is a technological and modern amplifier with High / Low frequency filters, a fixed channel separation of 45 dB, and a sensitivity of 200 mV-8. The power of the LX-4.80 will be enough to provide power for both the rear and front speakers. It delivers 120W in Stereo, 240W bridged.
Without a reliable amplifier, no acoustics can be called really powerful and high-quality sounding. The above parameters of the model, combined with low cost, makes it an essential element for increasing the potential of the system.
Features
Stable work at loads: 2 and 4 ohms, stereo
Bass Boost: 0-6-12 dB
Fuse rating: 2 x 20 A
Frequency range: 10Hz ~ 30KHz
Parameters
Peak power: 1300 W
Rated Power at 4 Ohm: 80 W x 4, Bridged (MONO): 260 W x 2
Rated Power at 2 Ohm: 130W x 4
Sensitivity: 200mV-8V
Signal to noise ratio: ≥ 92dB
Harmonic Distortion: (THD) @ 1kHz (4 ohms) 0.15%
Channel separation
Channel separation:> 45dB
Low pass filter: 30-300 Hz
High pass filter: 30 - 8 kHz
Number of channels: 4/3/2
General details
Dimensions: 200 x 58 x 292mm